Water Nail Stickers Deni Carte
- Characteristics
- How to use
-
Age:
18+
Volume: 1 pcs.
Classification: mass-market
Country: Poland
Made in: Poland
-
Apply a base coat to the prepared nail surface and cure it under a lamp.
Next, apply the desired number of layers of colored polish (lighter shades are recommended) and cure each layer under the lamp.
Apply a thin layer of top coat with a sticky residue over the color, cure it, but do not remove the sticky layer. Cut out the desired design from the set, leaving as much clear film around the edges as possible (do not cut right up to the design). This provides a larger surface area for adhesion to the nail. Place the cut-out design in warm water for 5-10 seconds until the film becomes movable. Blot any excess moisture with a tissue to remove all water from the film. Carefully slide the design off the paper backing and position it on the sticky top coat layer. Smooth out any wrinkles with a tissue and gently press it down.If there are excess film pieces, trim them with scissors, and remove any excess at the free edge with a file. Using a fine brush, apply top coat around the edges of the design as if creating a border. Cure it once more.