Single-Phase Modeling Gel, transparent pink PNB UV/LED One Phase Builder Gel Crystal Pink
15 ml
50 ml
- Characteristics
- Description
- How to use
-
Age:
18+
Volume: 15 ml, 50 ml
Classification: professional
Country: USA
Made in: USA
A beautiful, neat, and well-groomed manicure is an integral part of one’s appearance. It's unbecoming for a lady to shyly hide her hands in her pockets if her nail polish is chipped or if her nails look untidy in general. Thanks to current nail extension technologies, it’s possible to acquire fierce claws in just a matter of seconds.
This can be achieved with the help of a qualified nail service professional using the UV/LED One Phase Builder Gel Crystal Pink by the professional American brand PNB. It features a light, maximally natural nude shade and boasts strong adhesive properties. It is necessary to apply and evenly distribute a thin layer of the product on the tip or form, allowing it time to polymerize for 2 minutes under a UV lamp and 60 seconds under an LED lamp. The medium viscosity and self-leveling ability make the PNB UV/LED One Phase Builder Gel Crystal Pink a true find not only for practicing professionals but also for beginners.
How to use: 1. Degrease the nail surface with Nail Prep. Push back the cuticle, remove the shine from the nail plate with a 180/240 grit buffer. Remove dust. Apply Nail Dehydrator.
2. Apply either an acid primer, Acid Primer, or a non-acid primer, Bond Control, depending on the condition of the nail plate. Use the acid primer when the nail plate is very moist; a non-acid primer is suitable for normal conditions. Acid Primer should be applied with a semi-dry brush in a small amount, avoiding the skin. The product evaporates from the plate on its own.
3. As a base, we use either UV/LED Builder Gel Crystal Clear or Crystal Pink according to preference. Apply in a thin layer using rubbing motions. Cure under an LED lamp for 30-60 sec. 4. Attach a form to each finger in turn and lay a thin substrate of the desired length and shape, modeling the architecture of the nails with the gel of the chosen shade. To create an arch, you may pinch the gel at 7-12 seconds, depending on the lamp. Then, cure under the lamp for a full gel polymerization for 60 seconds.*
5. Remove the residual stickiness with Gel Cleanser.
7. Perform a step-by-step filing with a 180/240 grit file.
8. Apply a finishing coat of UVLED Quick Top to add shine and protection from chips and scratches, curing for 60 seconds.
*If the nail plate is thin or moist, the use of Bio Base as a base coat is possible. It should be applied in a very thin layer using rubbing motions on a previously prepared nail, curing under the lamp for 30 seconds.-
1. Clean the nail surface with Nail Prep. Push back the cuticles and remove the shine from the nail plate using a 180/240 grit file. Remove any dust. Apply Nail Dehydrator.
2. Apply either Acid Primer or Bond Control, depending on the condition of the nail plate. Use Acid Primer if the nail plate is very moist; for normal nails, Bond Control is suitable. Apply Acid Primer sparingly with a semi-dry brush, avoiding the skin. It will evaporate on its own from the nail plate.
3. Use UV/LED Builder Gel (Crystal Clear or Crystal Pink) as the base. Apply a thin layer with rubbing motions. Cure in an LED lamp for 30-60 seconds.
4. Place the form on each finger sequentially and apply a thin base layer of the desired length and shape, sculpting the nail architecture with the chosen gel shade. To create a curve, pinch the gel at around 7-12 seconds, depending on the lamp. Then, cure completely in the lamp for 60 seconds.
5. Remove the sticky residue with Gel Cleanser.
6. File the nails step-by-step with a 180/240 grit file.
7. Apply the UV/LED Quick Top coat to add shine and protect against chips and scratches, curing for 60 seconds.
*If the nail plate is thin and moist, you can use Bio Base as the base coat. Apply a very thin layer with rubbing motions on the prepped nail and cure in the lamp for 30 seconds.
Reviews about PNB UV/LED One Phase Builder Gel Crystal Pink
I really liked it, it is convenient to use. It wears well.
Using this gel is simply a pleasure. I have tried different gels with varying consistencies and from different brands, but I still came back to this one.
The gel has a medium consistency, neither thick nor runny. It self-levels and stays on without chipping. It cures in an LED lamp. This gel is simply GOOD.