Dark Amber Lamp Fragrance Ambientair Lacrosse Dark Amber Lamp Fragrance

1. Choose a suitable location for the lamp: a flat and stable surface, away from heat sources and out of reach of children and pets.
2. Use a funnel to fill the lamp body to two-thirds of its capacity with a liquid suitable for catalytic lamps. The liquid can be neutral or scented, and you can mix them to achieve a lower scent intensity. After filling, clean any residual liquid from the lamp body and surface.
3. Insert the burner, ensuring that its wick is in contact with the liquid and that the stone is properly positioned above the metal base. If it's your first time using the burner, cover the stone with the cap (to prevent the scent from evaporating) and allow the wick to soak for 20 minutes.
4. Remove the cap and light the burner using a lighter, leaving the flame to burn for two minutes. The flame should reach about 7 to 10 cm (3 to 4 inches) and will reduce in size as the burner heats up. Do not leave the lamp unattended during these two minutes and never touch the stone during this process.
5. Blow out the flame and, once it is extinguished, cover the stone with the protective crown. The stone will be hot, so avoid touching it: your lamp is now operational.
6. Let the lamp purify the air for about 20 minutes in an area of approximately 10 square meters.
7. To stop the lamp, carefully remove the crown (it may be warm) and cover the hot stone with the metal cap to prevent further burning and evaporation of the scent.
8. For storage, leave the cap and crown on the metal base so that the lamp is ready for its next use.